Any one ever done a rear disc brake swap on an EG?

My drums in the back are scraping bad and I hate drums, so I did some searching and found out you can swap rear disc brakes and arms from an integra.

Any info on this would be great. What I have to buy/look for. Willing to listen and learn as I have hardly any ideas about hondas and their swappability in parts.

Trailing arms from a 99-00 SI/94-01 DC2 would be a solid start lol. Then you'd need e-brake cables. And while they're out I'd do wheel studs, and wheel bearings too.

http://www.honda-acura.net/forums/92-civic-el-and-del-sol/267253-rear-disc-brake-conversion.html

Ah , thanks for the link leet.

Any places you honda guys use to source these parts locally?

we have a dc2 rear kit including cables. lmk
$250

we have a dc2 rear kit including cables. lmk
$250

Ok will I have to get rotors and pads too?

If you do the 94-01 Integra swap, any local junkyard. :lol: Sorry, I sold mine. :-/

Ok will I have to get rotors and pads too?

the conversion i have has it all. but the rotors will need machined (rusty) new pads are a plus also.

If you're just using it as a daily driver, it isnt worth the money or time involved. If your car is like most from the midwest, all of the suspension bolts are likely rusted/seized.

92-95 civics (some ex 4drs, si hatch backs, and very very few ex 2drs came stock with them)

93-97 del sol (si or vtec models)

94-01 integras (all models)

99-00 si civic

You can usually find somebody selling a set for $100-150 but then will need to buy new pads, rotors, ebrake cables, and likely suspension bushings while you're in there. Just my .02 from personal experience. If you're not beating on the car, there really isnt a point.

FYI: U Pull and Pay in Carthage has 4 or 5 94-01 integras right now.

FYI: U Pull and Pay in Carthage has 4 or 5 94-01 integras right now.

Yeah, Im aready on my way ! Thanks though Matt.

Ive got some of the :
JDM EG6 Full Front & Rear Disc setups
JDM SIR Integra Full Front & Rear Disc setups
JDM Civic Type R 5 Lug with Front and Rear Disc Setups

Yeah, Im aready on my way ! Thanks though Matt.

Nice. The GSR has a bent rear left trailing arm, so don't bother with it. I think the LS with wood stakes instead of front shocks has good rears. :lol:

Nice. The GSR has a bent rear left trailing arm, so don't bother with it. I think the LS with wood stakes instead of front shocks has good rears. :lol:
:lol: