SIDEWAYS240
10-28-2003, 10:51 AM
Zex dry kit (universal)
works on many cars here is the zex check list..... Works on most hondas/acuras
Our nitrous kit is very universal by design. It works on most late model, direct port fuel injection kits.
ZEX™ Nitrous Compatibility Checklist
Engine must have a vacuum ported fuel pressure regulator
Throttle position sensor voltage must pass the following test:
Locate the T.P.S. (usually directly across from throttle linkage)
Turn ignition to on position (do not start engine)
Using a digital voltmeter, check each wire for a low voltage reading of approximately 1 volt.
Only one wire should have this low voltage with the throttle closed
While on that same wire, open the throttle completely and check the voltage reading
If your voltage reads 4.2 volts or higher, you are ready to install your ZEX nitrous kit
I have a bottle gauge and purgekit w/ it, perfect shape barelly used, $425
works on many cars here is the zex check list..... Works on most hondas/acuras
Our nitrous kit is very universal by design. It works on most late model, direct port fuel injection kits.
ZEX™ Nitrous Compatibility Checklist
Engine must have a vacuum ported fuel pressure regulator
Throttle position sensor voltage must pass the following test:
Locate the T.P.S. (usually directly across from throttle linkage)
Turn ignition to on position (do not start engine)
Using a digital voltmeter, check each wire for a low voltage reading of approximately 1 volt.
Only one wire should have this low voltage with the throttle closed
While on that same wire, open the throttle completely and check the voltage reading
If your voltage reads 4.2 volts or higher, you are ready to install your ZEX nitrous kit
I have a bottle gauge and purgekit w/ it, perfect shape barelly used, $425